How to reset the car radio that can be done easily without code. As an entertainment center in the car, Radio technology has developed greatly. From initially only able to play radio and cassette, now it can be connected to smartphones and other devices via Bluetooth connection to USB.
But what if the radio is having problems? The problems that arise on radio tend to vary. Starting from often dead on its own, the sound is not clear, difficult to connect with smartphone devices, does not want to live, Bluetooth is illegible, and others. If the radio condition is like that, the easiest way to fix it is through a reset. But how? For more information, check out the summary below.
How to Reset a Car Radio Without Code
Some ways to reset the car radio you can apply to the car. In addition to being faster to try to fix problems that arise, the cost is also more affordable because it has not been taken to the workshop.
It should be underlined that the ways given depend on the type of radio of your car. Therefore, consider the explanation.
Unplug All Cables
For the first way, you have to remove all the cables that are in the car radio. Here are the steps:
- Prepare all the tools needed, such as minus screwdriver, plus screwdriver, and flashlight
- Open your car’s Radio panel slowly
- If it’s open, remove all socket cables connected to the panel
- Next remove the bolt attached to the car radio
- If all the bolts have come off, lift the car radio
- Remove the connected socket cable there
- Wait a while and then reattach the entire socket cable to their respective places.
- Reattach radio and panels as before
Now you have done a Radio reset with the method of removing all cables. In addition to this method, there are other ways.
Release All Switches
This second way is easier because it only needs to remove all radio switches from the stand. Here are the steps:
- Prepare the necessary tools, such as minus screwdriver, plus screwdriver, and flashlight
- Remove the car radio from its stand
- Lift the Radio and remove all switches attached to its back
- Wait a while and then reattach all switches as usual
- Try turning on the Radio to see if the problem has been solved or not.
How to release all switches to reset the Radio has been successfully done. Easy, isn’t it?
Using Pin Code
If the type of radio owned by your car can be reset using a pin, then here’s the complete way:
- Prepare a pin that is commonly used to remove SIM cards from smartphones
- Turn on your car tape to start the reset process
- Check if there is a small hole above the output jack hole
- If there is, then put the pin into the small hole.
- Press and hold for some time until the car’s Radio screen appears to reset
Now you have successfully done how to reset the car radio by using a pin.
From the three ways above, hopefully one of them can fix the problem that occurs on your car radio. However, if you have not been able to solve this problem, the last option is to take it to the official workshop of your vehicle.