10 Types of Car Lights Based on Their Function, gNewscar – There are many lights that are used in cars both in the interior and exterior, both as headlights and accessories. However, there are only 3 types of car lamps that are now widely used, namely halogen, HID (High Intensity Discharge), and LED (High Emitting Diodes). All three have their own advantages and disadvantages.
- Halogen lamp; low light intensity (yellow and white), affordable price, good for visibility when it rains. It’s just that the appearance of this lamp is simpler.
- HID (High Intensity Discharge); brighter than halogen lamps and more expensive.
- LED (High Emitting Diodes); light intensity is better than halogen and HID with less power. Cool design and higher price.
10 Types of Car Lights Based on Their Function
In contrast to the above, there are more car lights according to their respective uses. Some of them are described by Suzuki as follows:
1. City Lights
City lights are often referred to as twilight lights because they are generally turned on at dusk. There are also those who call these city lights as distance lights because they are considered to be a signal and marker of the width of a vehicle. In addition, there are also those who often refer to these city lights as small lights because the light information produced by these lamps is smaller than other existing lights.
However, these city lights are basically position lamps / lights. For the front they are known as front position lamps, while those for the rear are known as rear position lamps or tail lamps.
In some vehicles, some have position lights that are mounted on the side of the vehicle (generally mounted on the right-left fenders near the front wheels). This lamp is known as the side position lamp.
City Lights function:
1. As a marker about the position of the vehicle
2. As a marker of the length and width of the vehicle
3. As a marker for the direction of the vehicle
2. Stop Lamp
stop lamp, which is red, signals to the vehicle behind that the car is about to stop. This light is located on the back of the car and is one switch with the twilight light. The lamps used are usually LED lights, because they seem luxurious and futuristic.
Many think that the stop lamp is just an accessory, even though it has the same function as the existing brake light.
The position is deliberately at the top so that the rider behind it is easy to monitor and know from afar. According to Suparna, in several other countries this device has become a standard feature that every car must have.
3. Low Beam
The main function of the near light is to illuminate the road in front of the car in a short distance of about 5 meters. The low beam is usually turned on at night on busy streets and is bright or well-lit.
The Low Beam on the main illumination of the vehicle works by illuminating the headlights toward the front and bottom of the road we pass. This lighting is more functional in areas where street lighting is felt sufficient and also a lot of traffic is passed.
4. High Beam
Is the opposite of near lights, long lights are used when traveling at night with quiet and dark road conditions. The range of this lamp is about 10 meters. The type of high bean that is used is usually from halogen and is a switch with a close light
5. Fog Lamp
Most of the new cars today are equipped with fog lamps or fog lamps. This light includes a safety feature with the function of helping the driver’s view when driving in harsh weather such as heavy rain, puffs of smoke, or crossing in foggy areas.
But in fact, many users turn on fog lights most of the night, even in brightly lit weather. Use of fog lights according to their needs. Actually, the right time to turn on the fog lamp is none other than when it rains heavily, especially at night or when the road is foggy. This is because the beam of the fog lamp tends to be wider than the luminescence of the main light that is further forward.
There are two types of fog lamps, namely front fog lamps and rear fog lamps. The front fog lamp is installed on the lower right and left front bumper. Meanwhile, the rear fog lamp is integrated with the car’s taillights, which emit a bright red color.
The worse thing is that there are still many people on the road at night with no rain and no fog but the rear fog lights are turned on. This actually endangers the driver behind, because the glare of the rear fog lamp will interfere with the view of the car behind you.
Unfortunately, ordinary car owners usually only know that fog lamps are an additional accessory to differentiate the features and level of luxury of a car compared to other types. Even though this feature is a mandatory feature, especially if this car is used in an area that is often rainy and foggy.
6. Brake Light
Brake light has a characteristic, which is usually red. This light is located on the rear which aims to signal to other drivers that your car is about to stop. This lamp will light up brightly when the brake pedal is pressed
7. Turn Signal Lamp
Turn signal lights are signal lights on other vehicles that the car will turn right or left. This light is required to be yellow as a sign of the vehicle behind to slow down and be careful.
8. Hazard light
This car light is only turned on when the car is in an emergency by turning on the right and left turn signals simultaneously.
9. Reverse Lights
The shape of the reverse lamp is whitish yellow which will light up when the car is in a reverse position. The position of this light is on the back of the car, so that the vehicle behind it can know it.
10. Cab Lights
The only car lights that are inside the car are these lamps. This lamp is used for lighting at night. Cabin lights are usually dim yellow so as not to interfere with the view of the vehicle behind it.
The above is an explanation of Learn 10 Types of Car Lights Based on Their Function by understanding the function of each lamp in your vehicle, of course, it can help to avoid turning on the wrong one and in accordance with applicable regulations.