For those of you who have a four-wheeled vehicle, it should understand the various ways of car maintenance that can be done alone so that the condition of the vehicle remains excellent. In this case it is important to know that the engine room has a used oil crust that can reduce engine function if left unchecked. Therefore, here’s 5 Ways to Clean Oil Crust in a Car Engine
Clean Oil Crust in a Car Engine Tips, Car engines are calculated how to be checked in terms of cleanliness. Though it is important to know if there is a side of the oil crust there. Yes, the oil used can actually leave the rest of the stubborn crust that should not be left too long. Therefore, you need to know how to clean the oil crust on the car engine.
Follow How to Clean the Following Oil Crust
Fuel components in the car will be difficult to function properly, if you do not pay attention to the cleanliness and maintenance of the car engine properly. What if the oil crust in the car engine is left alone? Not only does it contaminate the machine, but it can also damage it. The function of the machine is also reduced. Of course, you do not want the performance of the engine to decrease. Come on, check out the full summary below.
1. Prepare All Equipment
The first step in how to clean the car engine from the oil crust is to prepare the entire equipment. There are some equipment that you have to prepare because it is very helpful in the cleaning process. Starting from sponges, toothbrushes, to microfiber cloth.
These three tools will help you in cleaning the oil crust, especially in small parts that are difficult to reach. But don’t forget to ensure the cleanliness of all the tools. If it is dirty, instead of cleaning the oil crust, instead your vehicle’s engine gets more dirt. So if the tools are too dirty, you can buy a new one.
2. Get a Special Cleaner
It doesn’t just require a sponge, toothbrush, and microfiber cloth. You also need a special cleaner. What’s his name? The cleaner is an engine conditioner. The use of cleaners is to produce foam when it has been sprayed into the combustion chamber.
With the foam produced by the conditioner engine, the process of cleaning the oil crust becomes even easier.
3. Use a Flush Engine
Not only do you need an engine conditioner, you should also use a flush engine. What exactly is an engine flush? This cleaner has a detergent-like form. Its function is to clean dirt and remove crust in the oil line.
So a flush engine is used specifically to clean the oil track in your car. Therefore, the way it is used is to put it in the engine before changing oil or there is still a long time. Then you can start starting the engine for approximately 15 minutes by stepping on the gas with a stationary position at 2,000 RPM. Then discard the oil while the engine is hot.
4. Use Degreaser Engine
If you already use a flush engine, you also need to use one more liquid. Its name is engine degreaser. It is used to completely clean the engine room. How to use it by spraying it into the machine part, then brush with soapy water until clean.
Then return flush with running water then dry using a microfiber cloth. Easy, isn’t it?
5. Always Do Periodic Maintenance
Oil crust is very disturbing because it not only makes the engine dirty, but can also reduce the performance of the car. Car oil that is problematic also has the potential to endanger your safety. You should not forget to always take the car to a trusted workshop in order to get periodic maintenance.
Those are some of the 5 Ways to Clean Oil Crust in a Car Engine. The way that has been mentioned is quite easy, you can even do it alone at home. Even so, of course bringing it to the best car maintenance or service service will make the vehicle more optimal.
