Many are experienced driving cars in the city or between cities, but when you encounter the ramp it will still be dangerous if you do not know How to Drive a Manual Transmission Car on an Uphill Road for Beginners. The following tips are drivers for beginners who are still not too experienced to pass the usually steep uphill path and are still confused how to control the clutch and gas in the situation.
Driving a manual transmission car can make anyone who is just learning to drive a car feel afraid that the car engine can die in the middle of an incline. Especially if there is a traffic jam on the ramp. Therefore, here we present some tricks how to drive a manual car on a steep incline track.
How to Drive a Manual Transmission Car on an Uphill Road
1. Use Teeth 1 and 2
One of the wrong ways that until now is still done by drivers is to always step on the clutch pedal half or clutch hanging when encountering the uphill lane.
Indeed this way can be done, but will make the clutch will heat quickly, even up to breaking. So the most effective way to drive a manual car when encountering an uphill lane is to use gear 1 and gear 2. Use gear 1 when the incline is really steep then do a gear shift 2 for a fairly ramped incline.
2. Use the Handbrake When Stopping
As explained in the first point, the combination of gear 1 and gear 2 when meeting the road uphill becomes an effective manual car driving solution. In addition, AutoFamily can also use the handbrake as a replacement for clutch stepping with the left foot.
Especially when the car stops, you can immediately pull the handbrake lever so that the car does not come down. When the car starts running, release the handbrake slowly and then follow it by removing the clutch and brake pedals. While the right foot stepped on the gas pedal to move forward. This method will be difficult for novice drivers. So, you can practice first on an incline that is not too crowded.
3. Foot Brakes Only for Not Too High Climbs
If you find an incline that is not too high, you can use a combination of foot brakes and clutch by adjusting the engine rotation.
The way to do this is to press the brake pedal when it stops, then move the gears in a neutral position. When you start walking, release the brake pedal slowly by removing the clutch pedal.
The car will vibrate and advance slowly. That’s why this way of driving a manual car will only work on inclines that are not too high.
4. Stepping on the Brake Pedal and Clutch Simultaneously
When the car stops on the ramp, step on two pedals at once, namely the brake pedal and clutch using the left foot. Automatically, the car will stop and the engine is still alive. Then, make sure the transmission is in the 1st gear position.
When going back, step on the gas pedal to about 2000 RPM and simultaneously, lift the left leg to lift the clutch and brake slowly to the half position.
This will also give rise to the technique of stepping on the clutch pedal half but the brake pedal has also stood by. So when the car in front stops, you immediately press the left foot to stop the car without turning off the engine.
That’s a little tip as mentioned in the title of this article is How to drive a manual transmission car on the road uphill. Don’t forget to keep a look at the slope level of the climb. The ramp does require a special way so that your car can climb safely.
See Also: Learning To Drive An Automatic Car, 5 Important Things To Avoid
