How to fix a Car Fan Belt Noise is actually not that complicated, because this is not a serious problem but it takes skill to fix it. The car fan belt is a rubber car engine cooling fan, which is made of imitation rubber and steel.
The fan belt functions as a player for various engine components. From the oil pump to the alternator. Without a fan belt, you can be sure that the car will not be able to go. Fan belts have a relatively short service life.
This is because the fan belt is in the open position and is connected to the engine pulley, so the fan belt is often exposed to various disturbances such as splashing water when it rains or passing through puddles.
The thing that is more dangerous is when the car is running when the road conditions are flooded. It is not only water that will disturb the stability of the fan belt function, but also soil, mud, and even sand.
All these disturbances will cause the car’s fan belt to be damaged, namely the appearance of a loud squeaking sound or commonly known as belt dressing.
Belt dressing occurs because the rubber can’t rotate the pulley perfectly. Another cause is that the pulley is dry because it has been eroded by splashes or flooded with water and dirt.
How to Fix Car Fan Belt Noise
Fan belts that make noise certainly make the trip uncomfortable. If left unchecked, other car components are also damaged. Therefore, follow the steps to overcome the fan belt making this noise.
1. Spray soapy water
An easy way to deal with a noisy car fan belt, the first and simplest is to spray a mixture of soapy water on the noisy belt.
This method is a less effective method, because it will not be able to withstand the noise of the fan belt for a long time, but it can be used in an emergency or emergency situation.
So how to remove the noise on the fan belt is quite helpful in an emergency situation. However, it is not recommended to do this further.
2. Using lubricant or oil
The second alternative is to apply oil or engine lubricant to the belt.
How to apply it must also be careful and sufficiently. Because if it’s too much, it can make the belt slip and actually make a loud sound again. If the Auto Family engine room is spacious, you can also use candle sticks as a substitute for engine oil or lubricant.
3. Grease
Next is how to overcome the sound of the car fan belt by using grease (grease). This method is similar to the engine oil or lubricant method.
That is by applying enough to the belt until the belt stops ringing. Overdosing on the belt can also cause the belt to slip. So, you have to be careful in dosing or smearing.
4. Using a special fluid belt
The next most modern way to get rid of noise or noise from the fan belt is by spraying a special aerosol can of belt fluid that Auto Family can get at car accessories stores or hypermarkets.
This method is the easiest way and without the need to get your Auto Family hands dirty. How to spray it is not the same as spraying the carburetor.
The first, start the engine and then leave the engine in a stationary condition. Next, spray this liquid on the ringing belt until the sound disappears.
Do not overspray or until the belt is muddy. This is not good for the belt, it actually makes the belt slip or even makes the engine cabin dirty.
So, this method also requires caution and concentration. That’s an easy way to deal with noisy fan belts from simple to modern in dealing with noise in how the fan belt works.
The difference between each method or method is in cost and quality, or the durability of the material in protecting the fan belt so that it no longer makes loud noises or squeaks. The more modern the method used, the better the quality and the more durable the car fan belt until it stops ringing.
See Also: Timing Belt Noisy : Causes and How to Fix It for a More Smooth Machine
